Print the required number of parts as listed below.

1 x Tool-Changer Cover Body.stl  

      Tool-Changer Cover Dot.stl  
      Tool-Changer Cover Long.stl  
      Tool-Changer Cover Triangle.stl  

1 x X-Carriage Cable Bracket.stl  
1 x X-Carriage Cables.stl   
2 x Hemera Bowden Bracket.stl


Typical slicer settings.  
   
0.20 Layer height.  
0.40 Nozzle.  
3 Perimeters.  
5 Top Layers.  
5 Bottom Layers.  
12% Infil.  

Print with your favourite material.