Filament Starter Settings

These are starting guidelines to get you started with your E3D RapidChange Revo HotEnd, softer filaments such as TPUs may require a Direct-drive Hemera configuration for optimal results.

These settings are intentionally conservative in order to make the most out of low-end motion systems i.e cartesian (bed slinger) roller wheel-based machines. printers that have more robust motion systems will be able to maintain quality at higher movement speeds - providing you stay with the volumetric flow rate limits of your HotEnd.

PETG PLA ABS/ASA TPU 92A TPU 85A TPU 75A XTCF20 PACF

 

PLA

Track width	Preset	Layer height	Temperature	Wall speed	Infill speed
0.15*	Fine	0.05	200	30	60
0.15*	Medium	0.07	200	30	60
0.15*	Coarse	0.1	200	30	60
0.25	Fine	0.06	200	15	30
0.25	Medium	0.125	200	25	50
0.25	Coarse	0.18	200	30	60
0.40	Fine	0.1	200	15	30
0.40	Medium	0.2	200	25	50
0.40	Coarse	0.3	200	30	60
0.60	Fine	0.15	200	15	30
0.60	Medium	0.3	200	25	50
0.60	Course	0.45	200	30	60
0.80	Fine	0.2	200	15	30
0.80	Medium	0.4	200	25	50
0.80	Course	0.6	200	30	60

*0.15 Nozzles may also require you to:
Have an extra well-levelled bed
Clean your filaments
Use extra bed adhesion
Stick to filaments with good dimensional accuracy
ASA and ABS work best with 0.15mm Nozzles so consider starting with these filaments
Don't use any filled materials (Abrasives)

 

PETG

Track width	Preset	Layer height	Temperature	Wall speed	Infill speed
0.25	Fine	0.06	240	15	30
0.25	Medium	0.125	240	25	50
0.25	Coarse	0.18	240	30	60
0.40	Fine	0.1	240	15	30
0.40	Medium	0.2	240	25	50
0.40	Coarse	0.3	240	30	60
0.60	Fine	0.15	240	15	30
0.60	Medium	0.3	240	25	50
0.60	Course	0.45	240	30	60
0.80	Fine	0.2	240	15	30
0.80	Medium	0.4	240	25	50
0.80	Course	0.6	240	30	60

 

ASA

Track width	Preset	Layer height	Temperature	Wall speed	Infill speed
0.25	Fine	0.06	240	15	30
0.25	Medium	0.125	240	25	50
0.25	Coarse	0.18	240	30	60
0.40	Fine	0.1	240	15	30
0.40	Medium	0.2	240	25	50
0.40	Coarse	0.3	240	30	60
0.60	Fine	0.15	240	15	30
0.60	Medium	0.3	240	25	50
0.60	Course	0.45	240	30	60
0.80	Fine	0.2	240	15	30
0.80	Medium	0.4	240	25	50
0.80	Course	0.6	240	30	60

*0.15 Nozzles may also require you to:
Have an extra well-levelled bed
Clean your filaments
Use extra bed adhesion
Stick to filaments with good dimensional accuracy
ASA and ABS work best with 0.15mm Nozzles, so consider starting with these filaments
Don't use any filled materials (Abrasives)

 

TPU 92A

Track width	Preset	Layer height	Temperature	Wall speed	Infill speed
0.25	Fine	0.06	230	15	30
0.25	Medium	0.125	230	25	50
0.25	Coarse	0.18	230	30	60
0.40	Fine	0.1	230	15	30
0.40	Medium	0.2	230	30	60
0.40	Coarse	0.3	230	40	80
0.60	Fine	0.15	230	15	30
0.60	Medium	0.3	230	25	50
0.60	Course	0.45	230	30	60
0.80	Fine	0.2	230	15	30
0.80	Medium	0.4	230	25	50
0.80	Course	0.6	230	30	60

 

TPU 85A

Track width	Preset	Layer height	Temperature	Wall speed	Infill speed
0.25	Fine	0.06	260	15	30
0.25	Medium	0.125	260	25	50
0.25	Coarse	0.18	260	30	60
0.40	Fine	0.1	260	15	30
0.40	Medium	0.2	260	25	50
0.40	Coarse	0.3	260	30	60
0.60	Fine	0.15	260	15	30
0.60	Medium	0.3	260	25	50
0.60	Course	0.45	260	30	60
0.80	Fine	0.2	260	15	30
0.80	Medium	0.4	260	25	50
0.80	Course	0.6	260	30	60

 

TPU 75A

Track width	Preset	Layer height	Temperature	Wall speed	Infill speed
0.25	Fine	0.06	260	15	30
0.25	Medium	0.125	260	25	50
0.25	Coarse	0.18	260	30	60
0.40	Fine	0.1	260	20	20
0.40	Medium	0.2	260	25	25
0.40	Coarse	0.3	260	30	60
0.60	Fine	0.15	260	15	30
0.60	Medium	0.3	260	25	50
0.60	Course	0.45	260	30	60
0.80	Fine	0.2	260	15	30
0.80	Medium	0.4	260	25	50
0.80	Course	0.6	260	30	60

 

PETG Carbon Fibre (XT-CF)

Track width	Preset	Layer height	Temperature	Wall speed	Infill speed
0.40	Fine	0.1	250	15	30
0.40	Medium	0.2	250	25	50
0.40	Coarse	0.3	250	30	60
0.60	Fine	0.15	250	15	30
0.60	Medium	0.3	250	25	50
0.60	Course	0.45	250	30	60
0.80	Fine	0.2	250	15	30
0.80	Medium	0.4	250	25	50
0.80	Course	0.6	250	30	60

 

Nylon Carbon Fibre

Track width	Preset	Layer height	Temperature	Wall speed	Infill speed
0.40	Fine	0.1	270	15	30
0.40	Medium	0.2	270	30	60
0.40	Coarse	0.3	270	40	80
0.60	Fine	0.15	270	15	30
0.60	Medium	0.3	270	30	60
0.60	Course	0.45	270	40	80
0.80	Fine	0.2	270	15	30
0.80	Medium	0.4	270	30	60
0.80	Course	0.6	270	40	80